SATA - Competence in compressed air filter systems

Problem solving for any situation

Lack of adhesion, dust, fish eyes and other problems on coated surfaces are usually the result of problems in the compressed air supply. These mistakes are expensive. They can be avoided with 100% technically clean air. SATA offers the solution with a high quality, durable filter system.

Compressed air requirements are not always as high as required in the body shop. As a result, SATA filters are designed as a modular system so units can be specifically combined to meet any requirement.

Our knowledgeable distributors and dealers will be happy to provide advice.
Please use the SATA air quality test kit to evaluate compressed air quality. Helpful tips can also be found in the compressed air adviser.

You can fill any need from our product line: from oil and water separator with particle filter to the fine filter, from the activated charcoal filter to the super fine filter.

Oil / water separator with particle filter

For automotive refinish, industrial and on-the-job sites

Prolongs the lifetime of air driven tools like impact wrenches, sanders, staplers etc.
Important for gun washers, blow guns and applying primer and filler
Thoroughly prevents condensation pass through
Particle filtration to 5 micron
High air flow of 3.600 NI/min at 6 bars (130 cfm at 90 psi)
Sturdy metal housing
May be used to a maximum of 120° C (248° F)

SATA® filter 414™

Single-stage sinter filter without pressure regulator, with outlet module (2 x G 1/4 a)

SATA filter® 424™

Single-stage sinter filter with pressure regulator and outlet module (2 x G 1/4 a)

Fine Filter

For body shops and any work requiring 100% technically clean compressed air

For trouble free topcoat applications
Basic choice for supplied air respirators with activated charcoal pre-filtration
Separation degree to 99.998%
Particle filtration size of 0,01 micron
High air flow 3.600 Nl/min at 6 bars (130 cfm at 90psi)
Sturdy metal housing
May be used to a maximum of 120° C (248° F)

SATA® filter 434™

Single-stage fine filter without pressure regulator, with outlet module (2 x G 1/4 a)

SATA® filter 444®

Double-stage sinter filter/fine filter with pressure regulator and outlet module (2 x G 1/4 a)

Activated Charcoal Filters

Thorough protection from odors, oil and solvent vapor in breathing air

For supplied air respirators without activated charcoal belt unit
Thoroughly prevents condensation pass through
Safety quick couplings
Sturdy metal housing
May be used up to a maximum 60° C (140° F)

SATA® filter 464®

Activated charcoal filter module add-on to fine filters

SATA® filter 484®

Triple-stage sinter filter/fine filter/activated charcoal with pressure regulator and outlet module (2 x G 1/4 a)