HVLP Technology

Extra savings with maximum transfer efficiency and minimum product consumption.

HVLP = High Volume Low Pressure - low spray pressure technology - designates an internationally recognized low pressure application method.

With HVLP paint spray guns, air cap pressure is maximum 0.7 bar, allowing to obtain a -> transfer rate of considerably above 65 %.

In order to obtain an excellent painting result with HVLP guns, too, a higher air volume is required for atomization. Companies which only possess a small compressor are usually better off with using paint spray guns in RP technology.

It is also important to know that the higher air consumption has practically no influence on the profitability of an HVLP paint spray gun. Savings of expensive paint material achieved with an HVLP gun by far compensate the slight additional cost provoked by the higher air consumption.

Therefore, SATA HVLP paint spray guns are called "Super Savers".



Made for special moments!

Due to its sophisticated low pressure technology, the SATAjet® 5000 B PHASER™ HVLP achieves maximum transfer rates exceeding 65 % by far, thus reducing the material consumption to a minimum. Therefore, it is also called the "Super Saver".

SATAjet® 5000 B HVLP

As versatile as you

The premium spray gun SATAjet 5000 B sets new quality standards, while painting has become as easy as never before. Being extremely versatile in terms of application distance and inlet pressure, this new high performance spray gun is leading the way. Now, painters have the possibility to set pressure and distance as required by the paint to be applied, the climatic conditions and the work method - to achieve perfect finishes.

SATAjet® 4000 B HVLP

The Experience in Form and Function

The SATAjet 4000 B is setting the standards. Featuring state-of-the-art technology, the spray gun has been optimised with the passion for precision so typical of SATA as well as undergoing intensive practical tests. The result: a soft spray pattern which is second to none, perfect ergonomics and outstanding atomisation for excellent finishes.

SATAjet® 3000 K HVLP

Pressure fed high performance gun - The Super Saver

This high efficiency spray gun is especially suitable for painting large surfaces. Finest material atomisation and the large spray pattern provide perfect finishes and uniform material Distribution. Robust design, low maintenance and ergonomic balance make the SATAjet 3000 K the perfect spray gun for permanent use in both industry and craft.

SATAjet® 1500 B HVLP SoLV

For more options in the application of solvent materials.

Designed for Full System Application: solvent-based basecoats, either Low VOC or National Rule as well as sealer and clearcoat.

SATAjet® 1000 B HVLP

The Versatile One - for universal coatings

The SATAjet 1000 B is the multi application choice amongst gravity flow cup spray guns for craft and industry. Due to the wide range of nozzle sizes and accessories available, such as pressurised and agitator cups, various materials can be perfectly applied: low-viscosity stains, clear coats, texture finishes and glazes as well as spray-on glues and other thixotropic products. Even areas of difficult access can be easily coated due to extensions available in various configurations.


The spray gun for carpenters and woodfinishers

This robust and easy to clean universal spray gun is tailor-made for the woodfinishing industry. Its comprehensive selection of nozzle sizes ranging from 0.8 to 5.0 and the availability of pressurised as well as agitator cups allows the application of a large spectrum of different paint materials: from low-viscosity wood stains, single stage materials and clearcoats to thick film stains, glues and thixotropic materials.

SATAjet® 1000 K HVLP

Versatile for large surfaces - the universal spray gun for big jobs

The small and lightweight SATAjet 1000 K supplied from pressure pots or double diaphragm pumps is an allrounder spray gun. Due to its large range of available nozzle sizes, this pressure fed spray gun is perfectly suitable for the application of various materials: from thin wood stain, clearcoat, textured paint and glaze to glue and other thixotropic materials. Extensions which are available in various versions and sizes allow perfect coating of areas difficult to access.

SATAjet® 100 B F HVLP

Specialists In Their Profession - Application of Primer Materials

Prep materials such as primer, filler and spray putty fulfill an important function within the paint process. Therefore, particular attention must be paid to the application of these materials, using a dedicated primer gun. The wide nozzle range of the SATAjet 100 B allows to perfectly apply all sorts of prep materials. The fine atomisation and wide spray fan of the SATAjet 100 B help achieve even material distribution, thus saving expensive labour time due to much reduced sanding effort.

SATAminijet® 4400 B HVLP

For high precision work - Brilliance in Miniature

The SATAminijet 4400 B is the perfect compact spray gun if you are looking for superb finishes on areas of difficult access. The special SR nozzles are perfectly suitable for spot repairs on vehicles. It goes without saying that this spray gun allows the application of all modern paint Systems - including waterborne paints.

SATAminijet® 1000 K HVLP

The "compact" industrial gun - compact and lightweight

The SATAminijet 1000 K series was especially developed for the industrial coating of small to medium sized lots of small parts under series conditions.

SATAminijet® 1000 H HVLP

The "compact" industrial gun – compact and lightweight

For the application of small amounts of material, the SATAminijet 1000 is also available as suction cup gun.


Discontinued models


PraxistippsImportant hints for gun cleaning and maintenance


Download PDF