Dan-Am is an independent company acting as
exclusive authorized importer for SATA in the United States

Spray Guns

HVLP Spray Guns

RP-Technology

Conventional Spray Guns

Automatic guns

HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» / RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»

The future of air atomising paint application

Regardless of which technology you choose - you can be sure: With SATA spray guns you hold a top class product in your hand.

The technologies by comparison

VOCVOC means Volatile Organic Compounds; i.e. organic solvents.These solvents like many other substances trigger the formation of ground level ozone in combination with solar radiation.VOC guidelines established by the European Community (EU) are intended to contribute to reducing solvent emissions. These guidelines will be valid beginning November 1, 2004 for new shops and November 1, 2007 for all companies. Meanwhile, the VOC Guidelines have been incorporated into national law in most EU member states.X»-compliant spray guns

Strict environmental stipulations in more and more countries limit or even prohibit the use of conventional high pressure spray guns. Therefore, the future belongs to spray guns based on HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»- or RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» technology.

The benefits of both technologies:

SATA RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» paint spray guns are optimized high pressure guns. Their transfer rates are only slightly below those of the SATA HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» guns, but they ease the transition from conventional high pressure guns to more economical and VOCVOC means Volatile Organic Compounds; i.e. organic solvents.These solvents like many other substances trigger the formation of ground level ozone in combination with solar radiation.VOC guidelines established by the European Community (EU) are intended to contribute to reducing solvent emissions. These guidelines will be valid beginning November 1, 2004 for new shops and November 1, 2007 for all companies. Meanwhile, the VOC Guidelines have been incorporated into national law in most EU member states.X»-compliant paint spray considerably as they continue to give the painter the "high-pressure Feeling".

SATA HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» spray guns can be recognized by the green ring on the air cap, SATA RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» guns by the blue ring. Close

HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» Spray Guns

"The Super Saver" - with maximum transfer rates and minimum material consumption.

SATAjet^®5000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

as Special Edition SATA^® Chopper

Due to its sophisticated low pressure technology, the SATAjet® 5000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» achieves maximum transfer rates exceeding 65 % by far, thus reducing the material consumption to a minimum. Therefore, it is also called the "Super Saver".

SATAjet® 5000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

As versatile as you

The premium spray gun SATAjet 5000 B sets new quality standards, while painting has become as easy as never before. Being extremely versatile in terms of application distance and Inlet PressureThe inlet pressure on the spray gun should always be correctly adjusted. This is particularly easy with the DIGITAL technology of the SATAjet 5000 DIGITAL or with the retrofit SATA adam 2. It is also possible, however, to connect a standard air micrometer with manometer to the gun. Since pressure in combination with the supply of compressed air (air consumption) has a great influence on optimum results, you should always ensure to set the inlet pressure as recommended. You will find information on the correct pressure to be used in the paint application sheet of the paint manufacturers or on the web pages reserved for each individual SATA spray gun.X», this new high performance spray gun is leading the way. Now, painters have the possibility to set pressure and distance as required by the paint to be applied, the climatic conditions and the work method - to achieve perfect finishes.

SATAjet® 4000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

The Experience in Form and Function

The SATAjet 4000 B is setting the standards. Featuring state-of-the-art technology, the spray gun has been optimised with the passion for precision so typical of SATA as well as undergoing intensive practical tests. The result: a soft spray pattern which is second to none, perfect ergonomics and outstanding atomisation for excellent finishes.

SATAjet® 3000 K HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

For high quality finishes

This high efficiency spray gun is especially suitable for painting large surfaces. Finest material atomisation and the large spray pattern provide perfect finishes and uniform material distribution.

SATAjet® 1000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

For universal coatings

The SATAjet 1000 B is the multi application choice amongst gravity flow cup spray guns for craft and industry. Due to the wide range of nozzle sizes and accessories available, such as pressurised and agitator cups, various materials can be perfectly applied: low-ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» stains, clear coats, texture finishes and glazes as well as spray-on glues and other thixotropic products. Even areas of difficult access can be easily coated due to extensions available in various configurations.

SATAjet® 1000 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X» LIGNUM®

Excellent for all regular applications in the woodfinishing industry - in special wood finish optics

This robust and easy to clean universal spray gun is tailor-made for the woodfinishing industry. Its comprehensive selection of nozzle sizes ranging from 0.8 to 5.0 and the availability of pressurised as well as agitator cups allows the application of a large spectrum of different paint materials: from low-ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» wood stains, single stage materials and clearcoats to thick film stains, glues and thixotropic materials.

SATAjet® 1000 K™ HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

The universal spray gun for big jobs

The small and lightweight SATAjet 1000 K supplied from pressure pots or double diaphragm pumps is an allrounder spray gun. Due to its large range of available nozzle sizes, this pressure fed spray gun is perfectly suitable for the application of various materials: from thin wood stain, clearcoat, textured paint and glaze to glue and other thixotropic materials. Extensions which are available in various versions and sizes allow perfect coating of areas difficult to access.

SATAjet® 100 B F HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

Unmatched for the Application of Primer Materials

Prep materials such as primer, filler and spray putty fulfill an important function within the paint process. Therefore, particular attention must be paid to the application of these materials, using a dedicated primer gun.

SATAminijet® 4400 B HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

For high precision work

The SATAminijet 4400 B is the perfect compact spray gun if you are looking for superb finishes on areas of difficult access. The special SR nozzles are perfectly suitable for spot repairs on vehicles. It goes without saying that this spray gun allows the application of all modern paint systems - including Waterborne PaintsIt goes without saying that you can apply any waterborne paint with a SATA paint spray gun. There is only one limitation in this respect: Please do not use the same spray guns for the application of solvent-based as well as waterborne paints. We recommend working with two completely separate sets of spray guns, in line with the two separate paint systems.The CCS (Color Code System) which comes with each high-performance spray gun offers a clever solution to assist you in clearly marking your different spray guns. X».

SATAminijet® 1000 K HVLPHVLP = High Volume Low Pressure - low spray pressure technology.Terminology for an internationally recognized low-pressure technology whereby the transfer efficiency rate has to exceed 65%, while the maximum air cap pressure is below 0.7 bar.X»

The "compact"industrial gun

The SATAminijet 1000 K series was especially developed for the industrial coating of small to medium sized lots of small parts under series conditions.

RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» Spray Guns

"The Super Speed" - optimized high pressure technology for VOCVOC means Volatile Organic Compounds; i.e. organic solvents.These solvents like many other substances trigger the formation of ground level ozone in combination with solar radiation.VOC guidelines established by the European Community (EU) are intended to contribute to reducing solvent emissions. These guidelines will be valid beginning November 1, 2004 for new shops and November 1, 2007 for all companies. Meanwhile, the VOC Guidelines have been incorporated into national law in most EU member states.X»-complying transfer rates.

SATAjet^®5000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»

as Special Edition SATA^® Chopper

Due to its optimised high pressure technolgoy, the SATAjet® 5000 B RP® achieves maximum work speed and high transfer rates at the same time. It is also suitable for bodyshops which have smaller compressors and is rightly named the "Super Fast".

SATAjet® 5000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

As versatile as you

SATAjet® 4000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The Experience in Form and Function

SATAjet® 3000 K RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

For high quality finishes

This high efficiency spray gun is especially suitable for painting large surfaces. Finest material atomisation and the large spray pattern provide perfect finishes and uniform material Distribution.

SATAjet^® 1000 B RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»^® LIGNUM^®

Excellent for all regular applications in the woodfinishing industry - in special wood finish optics

SATAjet® 1000 K™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» ®

Allround paint spray guns for crafts and industry

Optimum work results in all fields of application

SATAjet® 1000 H™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» ®

The siphon cup version

Comes with 1l aluminium siphon cup, and quick cup closure allowing easy refill.

SATAjet® 100 B F™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» ®

Smooth surfaces from the start

This "Super Fast" primer and filler gun reduces sanding to a minimum in car refinishing

SATAminijet® 4400 B™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»

Compact spray gun for high class application

Perfect for painting small surfaces and areas of difficult access as well as for custom painting.

SATAminijet 1000 K RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»®

The "compact" industrial gun

The SATAminijet 1000 K series was especially developed for the industrial coating of small to medium sized lots of small parts under series conditions.

SATAminijet^® 1000 H RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X»^®

Kompakte und leichte Lackierpistole für spezielle Industrie-/Holzlackierungen

Für die Verarbeitung kleinerer Lackmengen ist die SATAminijet 1000 auch in Hängebechervarianten lieferbar.

SATA® spray master™ RP RP is an acronym for Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%. RP spray guns comply with the legislation of the EU VOC directive. Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment. X» ®

The multi-task tool for carpenters and painters

Special system for spraying high ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» material. Ideal for carpenters coating small surfaces and painters with special application problems.

Conventional Technology

Spray Guns for Special Work.

SATAjet® 3000 K spray mix™

Special high pressure fed gun with air assisted atomization

Ideal for spraying large quantities of high ViscosityMaterial viscosity is the time (in seconds) it takes the material to completely flow out of a standardized container. There are different measuring methods available. Please find the corresponding chart attached. X» material for high quality surface finishes. Special emphasis is put on what the item is used for such as truck frames, locomotives, containers and ships.

SATAjet® 100 B P

Special gun for applying polyester filler

Sharply defined fan, fine atomization and low overspray that considerably reduces masking and sanding

SATAjet® B

Reliable legendary high pressure gun for top coating quality

Ideal for topcoats in car refinishing, industrial, wall painting and woodworking trades.

SATAjet® H

The highly efficient spray gun for top painting quality

Ideal for topcoats in car refinishing, industrial, wall painting and woodworking trades.

SATAjet® 20 B

Round spray design gun for individual design tasks

Large nozzle range and replaceable air connection allow unimagined flexibility in use.

SATAgraph™ 1

The airbrush gun for beginners

SATAgraph™ 3

Premium airbrush gun with external material flow control

Available as gravity flow cup or siphon cup version.

SATAgraph™ 4

New Airbrush - the SATA graph 4

Conventional Technology

Spray Guns for Special Work.

We keep up with the times - and so do our paint spray guns!

In the right column on top of the page you will find a survey of all paint spray guns which have been replaced by a follow-up model. Due to their superior quality, SATA paint spray guns have a long lifetime – we feel constrained to meet these expectations. Nozzle sets, spare parts and technical service for these spray guns are still available.

Should you have any further questions, please feel free to contact us under +49 - 7154 - 811 -0.

Discontinued models

Practice Tips

Praxistipps Important hints for gun cleaning and maintenance

Download PDF

Print version

Sitemap www.sata.com/USA | Privacy Policy | Imprint

SATA
Contact

SATA
Newsletter

MySATA
Login

© 2002-2020 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany - Dan-Am Company, Spring Valley MN USA
All photos, logos and text of SATA products contained on this web site are the property of SATA GmbH & Co. KG.
Dan-Am is a fully independent company that is acting as the authorized importer and distributor for SATA branded products - and Dan-Am is responsible for the content shown on www.sata.com/USA.
Dan-Am has the sole responsibility for the contents of the website.
Other products referrenced within this website are property of Dan-Am Co.
Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.