The Super Speed - optimized high pressure technology for VOC-complying transfer rates.

RP means Reduced Pressure - optimized high pressure spray guns which achieve perfect finishes as well as transfer efficiency rates exceeding 65%.

RP spray guns comply with the legislation of the EU VOC directive. 

Switching from high pressure technology to RP technology is easily mastered by every painter, as it will allow him to continue working "as before". SATA RP spray guns are therefore also referred to as "Super Speed" spray equipment.Close


SATAjet® 5000 B PHASER™ RP

Made for special moments!

Due to its optimised high pressure technology, the SATAjet® 5000 B PHASER™ RP® achieves maximum work speed and high transfer rates at the same time. It is also suitable for bodyshops which have smaller compressors  and is rightly named the "Super Fast".

SATAjet® 5000 B RP®

As versatile as you

The premium spray gun SATAjet 5000 B sets new quality standards, while painting has become as easy as never before. Being extremely versatile in terms of application distance and Inlet Pressure, this new high performance spray gun is leading the way. Now, painters have the possibility to set pressure and distance as required by the paint to be applied, the climatic conditions and the work method - to achieve perfect finishes.

SATAjet® 4000 B RP®

The Experience in Form and Function

The SATAjet 4000 B is setting the standards. Featuring state-of-the-art technology, the spray gun has been optimised with the passion for precision so typical of SATA as well as undergoing intensive practical tests. The result: a soft spray pattern which is second to none, perfect ergonomics and outstanding atomisation for excellent finishes.

SATAjet® 3000 K RP®

Pressure fed high performance gun - The Super Saver

This high efficiency spray gun is especially suitable for painting large surfaces. Finest material atomisation and the large spray pattern provide perfect finishes and uniform material Distribution. Robust design, low maintenance and ergonomic balance make the SATAjet 3000 K the perfect spray gun for permanent use in both industry and craft.

SATAjet® 1500 B RP SoLV

For more options in the application of solvent materials.

Designed for Full System Application: solvent-based basecoats, either Low VOC or National Rule as well as sealer and clearcoat.

SATAjet® 1000 B RP®

The Versatile One - for universal coatings

The SATAjet 1000 B is the multi application choice amongst gravity flow cup spray guns for craft and industry. Due to the wide range of nozzle sizes and accessories available, such as pressurised and agitator cups, various materials can be perfectly applied: low-viscosity stains, clear coats, texture finishes and glazes as well as spray-on glues and other thixotropic products. Even areas of difficult access can be easily coated due to extensions available in various configurations.

SATAjet® 1000 B RP® LIGNUM

The spray gun for carpenters and woodfinishers

This robust and easy to clean universal spray gun is tailor-made for the woodfinishing industry. Its comprehensive selection of nozzle sizes ranging from 0.8 to 5.0 and the availability of pressurised as well as agitator cups allows the application of a large spectrum of different paint materials: from low-viscosity wood stains, single stage materials and clearcoats to thick film stains, glues and thixotropic materials.

SATAjet® 1000 K RP®

Versatile for large surfaces - the universal spray gun for big jobs

The small and lightweight SATAjet 1000 K supplied from pressure pots or double diaphragm pumps is an multi purpose spray gun. Due to its large range of available nozzle sizes, this pressure fed spray gun is perfectly suitable for the application of various materials: from thin wood stain, clearcoat, textured paint and glaze to glue and other thixotropic materials. Extensions which are available in various versions and sizes allow perfect coating of areas difficult to access.

SATAjet® 1000 H™ RP®

The siphon cup version

Comes with 1l aluminium siphon cup, and quick cup closure allowing easy refill.

SATAjet® 100 B F RP®

Specialists In Their Profession - Application of Primer Materials

Vormaterialien wie Grundierung, Füller und Spritzspachtel erfüllen innerhalb des Lackaufbaus wichtige Funktionen. Der Applikation dieser Materialien und dem Einsatz der richtigen Füllerpistole gilt daher besondere Aufmerksamkeit. Die SATAjet 100 B hat ein breites Düsenspektrum, womit sich alle Vormaterialien optimal verarbeiten lassen. Die feine Materialzerstäubung und der breite Spritzstrahl der SATAjet 100 B resultieren in einem glatten Verlauf mit wenig Nacharbeit. Kostbare Arbeitszeit wird durch geringen Schleifaufwand eingespart.

SATAminijet® 4400 B RP®

For high precision work - Brilliance in Miniature

The SATAminijet 4400 B is the perfect compact spray gun if you are looking for superb finishes on areas of difficult access. The special SR nozzles are perfectly suitable for spot repairs on vehicles. It goes without saying that this spray gun allows the application of all modern paint systems - including waterborne paints.

SATAminijet® 1000 K RP®

The "compact" industrial gun - compact and lightweight

The SATAminijet 1000 K series was especially developed for the industrial coating of small to medium sized lots of small parts under series conditions.

SATAminijet® 1000 H RP®

The suction cup version

With 1 l aluminium suction cup and easy material refill due to quick release fastener on the cup.

SATA® spray master™ RP®

The all round spray gun for the woodfinishing industry

Specialist for materials of high viscosity: Ideal for carpenters painting small surfaces only, as well as for special application in the painter industry.


Discontinued models


PraxistippsImportant hints for gun cleaning and maintenance


Download PDF